I had any inquiry from someone from my page on Houzz.com. This expectant mom wanted to add a bit of personality and uniqueness to her soon-to-be son’s nursery. She wanted something transportable in the event that her family moved to another house. Of course, this idea had to be within a budget. (I’m going to discuss the topic of budget in another blog entry.)
Think outside the box.
First of all, canvas can be applied with wallpaper paste. There is a certain technique that can be used which will allow you to remove the mural at a later date. I googled temporary murals and there are directions and recipes that decorators use in The White House to put up murals and relocate them when necessary.
Secondly, a very thin piece of birch can be used as a surface and screwed into the wall. You can purchase thicknesses of 1/4 inch. Birch has a smooth surface and takes paint well.
MDF (medium density fiberboard) can also be used. Thicknesses start at 1/4 inch.
Lastly, I want to show you a nifty surface I just happened to come across while at Lowe’s: underlayment Plywood. In the description card attached to the shelf, there was mention about this surface being ideal for craft projects. The surface was smooth and light.
I think this material was a winner. Once I sent her the photo of the item, she also agreed.
The client sent me specs. I needed to create a circular image, 30″ diameter with the Yankee pinstripes and Derek Jeter’s #2. I have a carpenter friend who is able to cut circles nicely, so he was able to help me out. Once cut, I knew this material was a winner; it was so light!
I primed both sides of the material and weighted the board down after the material was dry, to prevent warping. The painting went off without a hitch. I matched a blue to the Yankee blue. Easy-peasy. I kept the board on the wall and made sure that there was a “level” piece of wood attached to the wall to serve as a support shelf. Because i’m a perfectionist, I used a level to make straight lines and then figured out the proportion of the parts of the #2. A few coats of protective topcoat and voila!
Here’s how it came out:
To make things even more easy, industrial velcro can be used on the back of the piece to attach it to the wall. Or, if the client preferred to attach it to the wall, I provided flat headed screws, with the heads painted blue so everything would blend in.
Bottom line: anything is possible; sometimes it takes a little more research but the time invested creates success!